Troubleshooting guide

Trouble Shootihg Guide
I have programmed the timer but it will not record.
1) Check to see that the TIMER switch is on,the REC and PLAY
buttons are pushed down,and the PROGRAM time is correctly set
for AM or PM.See page 10 for Recording Instructions.
2) Is the patchcord plugged in? Unless you have a CCRadio plus and
have programmed it to start the VersaCorder, do not plug the patch
cord into the TIMER ACTIVATION SWITCH port. See page 14 for
Remote Switch Operation.
The VersaCorder is eating my tapes.
If the VersaCorder starts eating your tapes, please remember we rec-
Ommend no more than 110 minute tapes for reliable service. Longer
Tapes are more likely to wind around the tape mechanism and create a
Problem. If a 110 minute tape continues to wind around the mechanism
then try a new tape or rewind and fast forward the tape before trying
again. If the recorder continues to jam up, even on new tapes, your unit
may need servicing or replacing.
Maintenance.
It is a good idea to keep your VersaCorder and tapes as clean as possi-
ble. Tape recorders under daily heavy use, often last only about one
year. Dust and dirt is the biggest cause of wear.
VersaCorder Page17