Troubleshooting guide

Recording lnstructions
1) Set the VersaCorder on QUARTER speed for best results.
2) Switch VOLCE ACTIVATED to "ON" .
3) Press the "PLAY" and RECORD Buttons at the same time.
4) Set SENSITIVITY so the recorder starts when someone is talking.
Sensitivity can be set on 1, 2, or 3.Number "1" is the most sensitive
and can be used when there is little background noise and the voices
are not very loud. Number 3 is the least sensitive and can be used to
record people that are close to the VersaCorder and when the back-
ground noise is high.
The voice activated feature on the VersaCorder can be used with a
Police scanner, to save tape, or in a 911 center to record phone calls.
Recording lnstructions
The VersaCorder may also be set up for a timed and voice activated
Recording.This might be used to record noises in a room at a certain
Time of day.lt could also be used to record a conference when you can-
Not be there.
1) Follow the above instructions for voice activated recording.
2) Set the timer. See page 10 for instructions on setting the timer.
Using Voice Activated Recording
Using Voice Activated Recording with Timer
Page 12 VersaCorder
NORMAL OR
QUARTER SPEED
SENSITIVITY
VOICE ACTIVATION
ON/OFF