Troubleshooting guide

R ecording lmstructions
R ecording Using the Timer
1) To set the ON time, press the PR OGR A M B utton once. T he number
"1" and "ON" will appear in the display.
2) Press the DAY B utton until the desired day appears in the display.
Note: The VersaCorder can record any single day, weekends,
weekdays or everyday.
3) Select the appropriate hour by pressing the HOUR B utton until the
Desired hour appeare in the display and AM or PM is correct.
4) Select the appropriate minute by pressing the MIN B utton until the
Desired minute appears in the display.
5) To set the OF F time, press the PR OGR AM B utton once and OFF
Will be displayed.Follow steps 2-4 above to set the appropriate OFF
time.lf you are recording a four hour talk show that starts at 11:00 PM
on Monday, be sure to change the OFF time DAY to Tuesday.
6) Set the T imer Switch to On and press the PL AY and R E COR D B uttons.
Make sure the Voice A ctivation is "Off" .
L f you wish to program another event, you can press the PR OGR A M
B utton again and event number "2" and "ON" will appear. Follow steps
2-4 to program your ON and OFF times.
After you have set the timer, you can press the CL OCK B utton to return
To the clock display.
Page 10 VersaCorder
Minutes
PROGRAM #
DAY
Programmed
AM/PM
Setting
Hour
HOUR
DAY
MIN
PROGRAM