Specifications

39
7540 Highway 64 West Brasstown, NC 28902 [phone] [phone]
fax: [phone] email: [e-mail] web: www.grove-ent.com
Technical Questions? [phone] or [e-mail]. Due to high call volume, technical calls will be limited to 3 minutes.
www.grove-ent.com
WiNRADiO EMR Detector
This tiny, pocket accessory is ideal for detecting the presence of radio and electric fields
in your proximity. With a continuous frequency response from 50 Hz to above1 GHz, and an
average sensitivity of 25 uV/cm, this new EMR Detector from WiNRADiO is a very handy gadget!
The shirt-pocket MFJ-886 offers 1 MHz-3 GHz frequency range, a 100 MHz sensitivity of
0.8 mV and readout to 0.1 Hz, all from a large (3/4”H), 10-digit LCD!
A sensitive bargraph signal strength meter, an accurate 1 ppm time base which can be
calibrated externally, rechargeable batteries (included, up to six hours operation), are all part
of this rugged, anodized-aluminum-encased pocket instrument which measures only 2-3/4”W
x 3-1/4”H x 1-1/4”D, and comes with an AC adaptor/re-charger and telescoping BNC whip
antenna at no extra cost!
MFJ 886 Frequency Counter
TesT equipmenT & power supplies
Order TST06 - Our Price:
$
49
95
Order TST07 - Our Price:
$
114
95
MEILI SM5010 1000 MHz spectrum analyzer
The SM5010 spectrum analyzer is indispensable for viewing an entire block of radio spectrum, revealing unknown
signals. Choose small segments under 1 MHz wide, or step sequentially up to a giant swath of more than 1 GHz
, observing all signals in the spectrum.
Connect the SM5010 to an antenna to analyze radio systems, detect radio frequency interference, search for
unknown signals, and determine spectrum use in your area. Plug in earphones or a speaker to monitor signal
contents. Connect a test probe to track and measure signal distribution in transmitters, receivers, computers, and
other analog and digital instruments.
Technical Specifications
Frequency Range: 0.15 to 1050 MHz
Center Frequency Display Accuracy: ±100kHz
Marker Accuracy: 0.1% span + 100kHz
Resolution of Frequency Display: 100kHz (4.5 digit LED)
Frequency Scan width Accuracy: ±10%
Frequency Stability: Better than 150kHz/ hour
IF Bandwidth (-3dB): 400kHz and 20kHz
Video-Filter when selected: 4kHz
Sweep Rate: 43 Hz
Amplitude Range: -100dBm to + 13dBm
Screen Display Range: 80dB (10dB/div.)
Reference Level: -27dBm to + 13dBm (in 10dB steps)
Reference Level Accuracy: ±2dB
Average Noise Level: -90dBm (20 kHz bandwidth)
Distortion: < -55dBc of 2nd and 3rd harmonic
Third Order Intermodulation: -70dBc (two signals > 3MHz apart)
Sensitivity: Better then -90dBm
Log Scale Fidelity: ±2dB (without attenuation) @ 500MHz
Input Attenuator: 0 to 40dB (Four 10dB steps)
Input Attenuator Accuracy: ±1dB/10dB
Max. Input Level: +10dBm, ±25V DC (0dB attn) +20dBm (40dB attn.)
Span (Scan Width): 100kHz/div. to 100MHz/div in 1-2-5 steps; and 0Hz/div.
TST22 - Our Price:
$
1149
95
Many thanks... from a lapsed subscriber. Its good to be back (my
name was actually in an issue about a year ago...). Like many other
users, I download the .pdf version of the Mag into iPad and open it
with iBooks. Works nicely.
- Craig P.