Specifications

29
7540 Highway 64 West Brasstown, NC 28902 [phone] [phone]
fax: [phone] email: [e-mail] web: www.grove-ent.com
Technical Questions? [phone] or [e-mail]. Due to high call volume, technical calls will be limited to 3 minutes.
www.grove-ent.com
Diamond Wide Frequency Coverage Discone Antenna
The discone antenna is used by government and military agencies worldwide because
of its wide bandwidth characteristics and non-directional coverage. Diamond offers this
professional-grade discone at a popular price.
Designed for use with wide-frequency-coverage VHF/UHF scanners and receivers, the
Diamond D130J discone consists of 16 rugged, stainless-steel elements and is capable of
transmitting up to 200 watts in the amateur 50, 144, 220, 432, 900, and 1200 MHz bands.
The elements are arranged on a 24-inch support pipe equipped with two strong mounting
brackets to accomodate any standard mast-pipe (1”to 2-1/8” diameter).
Requires PL-259 Adaptor.
Order ANT09
Our Price:
$
99
95
Suggested Accessories:
ADP02 - F FEMALE TO PL259 “UHF” FEMALE ADAPTER .....$3.99
CBL25 - 25’ F to F RG6U cable .........................................$14.95
CBL50 - 50’ F to F RG6U cable ........................................$19.95
CBL100 - 100’ F to F RG6U cable ....................................$24.95
SWC01 - Antenna Switch ..................................................$19.95
Continuous frequency coverage from 100MHz-3300MHz (3.3 GHz) is ideal for the new
wide-frequency coverage receivers from ICOM, AOR, WiNRADiO, ALINCO and scanners,
too! Use it for transmitting up to 200 watts on ham*, government, military, aircraft and
commercial bands as well!
Compact (36”) and lightweight (2.1 lbs.); 1”-2” mast mount hardware included. Rapid
deployment with factory-cut elements--no adjustments required! Comes with 49’ of coax
with type N connectors.
* Best impedance match for amateurs on 144, 430, 1200 and 2400 MHz band
Recommended accessory: N/BNC adaptor
Icom AH-8000 Antenna
Order ANT54 - Our Price -
$
269
95
Designed to work with all UHF receivers including the WiNRADiO 3000 series, the AX-37A is a compact,
directional, planar, log-periodic, UHF directional antenna. Etched on a high-quality fiberglass substrate, it includes
a surface-mount, 20 dB preamplifier, a standard 9V battery holder, power switch and an LED indicator.
Suitable for indoor monitoring, surveillance and point-to-point communication (receive only), its directivity can
substantially null co-channel interference. Its small footprint (the size of a sheet of typing paper), light weight and
thin profile invite concealed installation, quickly accomplished with double-sided adhesive tape.
TECHNICAL SPECIFICATIONS
Frequency range: 300-3000 MHz (wider with reduced gain)
Antenna Forward Gain: 6.0 dBi (free space)
Amplifier Gain: 23 dB @ 1 GHz , Amplifier Noise Figure: 2.0 dB
Amplifier IP3: +27 dBm , Primary Sensitivity: E-field
Polarization: Horizontal or vertical (depending on mounting)
Impedance: 50 ohm (Nominal)
Power: 9V @ 40 mA (standard PP3 battery) , Connector: SMA
Front-to-back ratio: 18 dB min (180 degrees from main lobe)
VSWR: 1.3:1 , Size: 11.5” x 8.4”, Weight: 5 oz
WiNRADiO AX-37A Series Planar, Log-Periodic Antennas
WiNRADiO AX-37A
Base board only, no enclosure, with preamplifier, receive only, 9V battery power.
Order ANT28 - Our Price:
$
389
95
WiNRADiO AX-37AP (special order) Base board only, no enclosure, with preamplifier, receive only, 12V bat-
tery power.
WiNRADiO AX-37AX (special order) Base board only, no enclosure, no preamplifier, receive and transmit.
WiNRADiO AX-37AHX (special order) Ruggedized enclosure with hand grip, no preamplifier, receive and transmit.
WiNRADiO AX-37AH (special order) Ruggedized enclosure with handgrip, includes preamplifier, receive
only, external 12V DC power.
WiNRADiO AX-37AMX (special order) Ruggedized enclosure for outdoor mast-mounting, no preamplifier,
receive and transmit.
WiNRADiO AX-37AM
Ruggedized enclosure for outdoor mast-mounting, includes preamplifier, receive only, external 12V DC power.
Order ANT29 - Our Price:
$
499
95
NOTE: In the AX-31C and AX-37A series, these suffix letters indicate the options:
H: Hand Grip M: Mast Mounting P: Preamplifier X: Transmit