Specifications

17
www.grove-ent.com
7540 Highway 64 West Brasstown, NC 28902 [phone] [phone]
fax: [phone] email: [e-mail] web: www.grove-ent.com
Technical Questions? [phone] or [e-mail]. Due to high call volume, technical calls will be limited to 3 minutes.
WiNRADiO PC-based Receivers, G315 Series
This receiver is intended for government, military, security,
surveillance, broadcast monitoring, industrial and demanding
consumer applications.
The WiNRADiO WR-G315i is a software-defined high-performance VHF/
UHF receiver (9 kHz to 1800 MHz, extendable to 3500 MHz using an
optional downconverter) on a PCI card.
The receiver offers an unparalleled flexibility given its SDR architecture,
respectable dynamic range, and high sensitivity. Many useful features comple-
ment the receiver, making it capable of filling not only the role of a monitoring
receiver but also that of a measuring receiver, such as the calibrated S-meter
showing the received signal levels in dBm, µV or S-units, down to the -140
dBm noise floor, several spectrum analyzers, and many other features not usually found on receivers of this price.
The hardware and software package consists of the receiver card, Windows-based software, a start-up antenna
and a user’s manual.
RCV54 WR G315i .............................................................................. $CALL
RCV54-G WR G315i (government/professional version) ........................ $CALL
The receiver connects to an IBM-compatible PC via the USB port. Several receivers
can be controlled by a single PC to form a multi-channel HF receiver system.
The receiver has its own on-board DSP, and does not rely on the PC sound card for
the signal input; the digitization is done in the receiver itself, using a high-performance
analog-to-digital converter. As the DSP performs the final stage IF filtering and all
demodulation, this receiver is entirely software-defined, which means that additional
demodulation or decoding modes can be easily added by a mere software change.
(For example, an optional DRM decoder/demodulator is also available.)
Easily installed to any modern computer with the USB interface, this receiver represents an excellent mobile
solution for VHF/UHF listen-
ing and monitoring.
RCV64 WR G315e ..............................................................................$CALL
RCV64-G WR G315e (government/professional version) ....................... $CALL
The G313 Series receivers are professional, software-defined short-
wave receivers, for demanding monitoring and surveillance applications.
This is an internal model, where the entire high-performance shortwave receiver
(9kHz-30MHz) is contained on a PCI card, extremely well shielded against the effects
of PC-generated interference. The demodulation is performed by an on-board DSP,
which makes it possible to use multiple receivers in a single computer. Numerous
functions and facilities include recording and playback (both audio and IF spectrum),
IF shift, notch filter, noise blanker, and numerous test and measurements facilities
including several spectrum analyzers. There are also numerous hardware options,
factory-installed at the time of order. Simple “Plug and Play” installation.
RCV31 WRG313i ....... $1149.95
The WiNRADiO WR-G313e is a software-defined high-performance HF
receiver (9 kHz to 30 MHz, optionally extendable to 180 MHz) with a USB interface,
an external version of the acclaimed WR-G313i receiver.
The receiver connects to an IBM-compatible PC via the USB port. Several
receivers can be controlled by a single PC to form a multi-channel HF receiver system.
The receiver has its own on-board DSP, and does not rely on the PC sound
card for its performance. As the DSP performs the final stage IF filtering and all demodulation, this receiver is
entirely software-defined, which means that additional demodulation or decoding modes can be easily added by
a mere software change.
RCV31E WRG313e .......... $1149.95
WiNRADiO PC-based Receivers, G313 Series
Modications
OPTIONS ARE FACTORY INSTALLED AND WILL TAKE 4-6 WEEKS FOR DELIVERY. To order a
receiver with any of the options, simply add the option code(s) to the receiver model number.
For example, for a 180MHz receiver with external reference oscillator, the model number will be
G313i/180/XR. Options can be mixed together (except the IF options where only one can be selected, i.e. IF1
and IF4 cannot be selected at the same time).
MOD04 - Frequency Extension Option (G313/180) ............................ $249.95
MOD05 - External Reference Oscillator Option (G313/XR) .................. $199.95
MOD06 - Reference Oscillator Output Option (G313/RO) ................. $199.95
MOD07 - Intermediate Frequency Output Option 10.7 MHz (G313/IF1) $249.95
MOD08 - Intermediate Frequency Output Option 45 MHz (G313/IF4) $199.95