Specifications

10
7540 Highway 64 West Brasstown, NC 28902 [phone] [phone]
fax: [phone] email: [e-mail] web: www.grove-ent.com
Technical Questions? [phone] or [e-mail]. Due to high call volume, technical calls will be limited to 3 minutes.
GROVE [phone]
RECEIVERS
Dual watch capability The IC-R2500 has dual watch receive capability*1,
allowing you to receive two bands simultaneously. It covers 0.01–3299.999
MHz (less cellular on consumer model) in AM, FM, WFM, SSB, CW, DV*2 and
P25*3 modes on the main receiver, while the sub-receiver covers 50–1300MHz
in AM, FM and WFM modes*4.
*1 Two antennas are required for dual watch receive.
*2 Optional UT-118 required.
*3 Optional UT-122 required.
*4 Frequency range differs depending on version.
Diversity receive capability The diversity receive* mode is useful for mobile
operation where the received signal changes continuously. It compares the signal
strength and chooses the antenna with the better signal to maintain good sound
and receive quality.
Wide LCD display for independent band control The wide LCD display shows both main/sub receiver settings in
an easy-to-read symmetric side-by-side layout. The controller provides separate tuning, volume, squelch knobs
and function buttons for the left (Main) and right (Sub) receivers. The LCD backlit color is selectable between
amber and green for your preference.
Digital mode reception The optional UT-118 D-STAR digital unit and UT-122* P25 digital unit provide the
latest digital mode reception. Catch the action in digital communications!
1000 alphanumeric memory channels With Icom’s Dynamic Memory Scan, DMS, you have a versatile memory
channel management system at your command. The 1000 memory channels can be arranged by service or
personal preference in the 21 memory banks. Selectively link the channels together to scan depending on your
needs. Programming the memory channels and 6 character memory names
is simple with your PC.
Supplied Accessories: AD-113A/E* USB cable and antenna, Software CD,
Controller head and cable, (3.4m; 11.2ft) *Depending on version
ICOM R-2500 Mobile/Base Receiver
Order RCV52
Only $929.95
Government agencies order RCV52-G Only $1019.95
Suggested Accessories:
ACC16 - ICOM UT-106 DSP Unit ................................$139.95
CBL12 - ICOM OPC-441 Speaker Extension Cable ......$32.95
DCC12 - ICOM CP-12L DC Power Cord .....................$29.95
ACC07 - ICOM UT-122 P-25 digital unit .....................$219.95
Measuring only 4-1/4”W x 1-1/2”H x 7-1/4”D, and weighing a
mere 13 ounces, the software-defined Perseus is high-performance,
0.39 uV sensitivity, 10 kHz-30 MHz, all-mode communications
receiver with +31 dBm IP3, 100+ dB dynamic range, and 90 dB
image rejection for overload immunity.
It features a lab-grade spectrum analyzer function with a span of
up to 800 kHz (1600 kHz software upgrade expected soon) and a
resolution bandwidth adjustable from 0.4-800 kHz. Optional frequency
extenders for VHF and UHF are being released as well.
Other spectrum-displaying receivers show signals pop up on your spectrum display, then disappear before
you can tune them in. But like the powerful surveillance receivers used by government and military intelligence
agencies, the Perseus can actually perform pre-detection recording, saving to your hard drive all the signals in a
swath of spectrum in real time for you to tune, monitor and analyze later with the Perseus advanced software!
Ideal for broadcast and utility DXing, SETI research, contesting, propagation studies, SIGINT and serious
signals surveillance as well.
Its 14 bit 80 MS/s A/D converter, high-performance FPGA-based down-
converter, and high-speed 480 Mb/s USB2.0 PC interface operate under
Windows 2000, XP, or Vista. Audio is via
the PC soundcard or on-board audio.
A universal 120/240 VAC 50/60 wall
adaptor is included. The antenna con-
nector is a BNC.
PERSEUS SDR
Order RCV57
Only $1199.00