Operating instructions

Some radios have a special Remote Switch connection provided. This is

for directly recording from a built in timer on the radio. The VersaCorder

may be compatible with the remote switch supplied on these receivers.

Please refer to the radio or device's manual for proper operation of this

feature. The Remote Switch works with the CCRadio plus, Sangean

ATS909, Radio Shack DX398, and the Grundig Satelit series.

The patchcord provided with the VersaCorder

can be used with the CCRadio plus as shown

in the photo. It is color coded for ease of instal-

lation. When the plugs are inserted, the

CCRadio plus becomes the master control for

the timer and overrides the VersaCorder’s

timer. (Please refer to page 16 of the CCRadio

plus manual on Setting the Timer.) You can set

up the VersaCorder as follows:

1) Plug the patchcord in according to color coding.

2) Set VOICE ACTIVATED to the “OFF” position.

3) Set TIMER to the “OFF” position.

4) Press the RECORD and PLAY Buttons on the VersaCorder.

5) Set the desired speed of the VersaCorder.

VOICE ACTIVATED

ON/OFF

REC

PLAY

SENSITIVITY

NORMAL OR

QUARTER SPEED

COLOR

CODED

JACKS

Page 14 VersaCorder

Remote Switch Operation

For Use With the CCRadio

plus