Operating instructions

You can purchase a telephone patchcord and phone line splitter from
your C. Crane dealer or C. Crane Company at 800-522-8863
(ccrane.com).
1) Connect the dual tip end of your patchcord to the
phone BEEP and MIC input on the front of the
VersaCorder.
2) Connect the phone line splitter to your phone wall jack.
3) Connect your existing phone line to the splitter.
4) Connect the phone plug end of the patchcord into the splitter.
5) Set the VersaCorder to QUARTER speed for maximum record time.
6) Switch VOICE ACTIVATED to “ON”.
7) Press the PLAY and RECORD Buttons at the same time.
8) Set SENSITIVITY to number “2” and test to be sure the recorder
starts when someone is talking.
On the bottom of the VersaCorder there is a switch to insert a BEEP
into your conversations at regular intervals to help advise both parties
they are being recorded. Set the switch to ON to activate.
BEEP ON/OFF
SWITCH
VersaCorder Page 13
Recording Instructions
Recording A Telephone Call
Note: It may be illegal to record a call without both parties knowl-
edge and consent. Please check with your local law enforcement for
details and advice. For important information, see pages 22 and 23.
Telephone Patchcord: Item # VCP