Specifications

40
7540 Highway 64 West Brasstown, NC 28902 [phone] [phone]
fax: [phone] email: [e-mail] web: www.grove-ent.com
Technical Questions? [phone] or [e-mail]. Due to high call volume, technical calls will be limited to 3 minutes.
GROVE [phone]
SPEAKERS, HEADPHONES & RECORDERS
Whether your mobile listening needs are for scanner, shortwave, ham radio, CB,
or professional two-way communications, this mobile accessory speaker will improve
audio reception. A simple snap of the toggle switch reduces pulse ignition noise and
background hiss. Enjoy improved audio with the rugged, 4-inch, 10-watt-rated speaker.
Mount the adjustable, steel bracket to your vehicle, plug the 10-foot cord into the 1/8”
(3.5 mm) external speaker jack on your radio, and you’re ready to go!
Power Rating: 10 watts
Impedance: 8 ohms.
VALOR VS6 NOISE CANCELING MOBILE SPEAKER
This handsome external speaker is ideal for improving sound from shortwave receivers
and scanners. Housed in a professional metal cabinet with gray wrinkle finish, the 5 inch
speaker handles up to 3 watts of receiver audio at 8 ohms. A front-panel mode switch
allows selection of SSB, CW, manual adjust, or mute. The listener may custom-adjust his
listening with multi-position switches for treble and bass.
Push-button selection from either of two RCA phono-jack inputs permits choice of audio
source (cable included), and both a quarter-inch and 1/8 inch (3.5 mm) headphone jacks
are front-panel accessible.
YAESU SP-8 Communications Speaker
SPK04 - Our Price:
$
159
95
SPK07 - Our Price:
$
14
95
JRC NVA-319 speaker features: Audio filter with buttons for High Cut A, High Cut B
and Low Cut. 38” Audio Cable with an RCA Phono plug. Input 2 Jack on the rear panel
for a second audio source. 1/4” headphone jack on the front panel of the speaker.
Impedance: 8 ohms. Max. Input: 3W. Dimensions: 7.1 x 5.2 x 11.1 in.
JRC NVA-319 External Speaker
SPK06DS - Our Price:
$
210
00
This compact speaker system utilizes powerful digital signal processing (DSP) to suppress annoying background
hiss and static, revealing crisp, clean audio for shortwave reception, scanner monitoring, ham radio transceiv-
ers, CB installations, maritime mobile, noisy recordings, and other sources of crackly, hiss-ridden audio. Unlike
competitive models which produce harsh, distorted audio with distracting DSP artifacts, the “Hear It” reveals up
to 2-1/2 watts of clean, undistorted sound. Controls are provided for volume and DSP level.
Measuring a mere 4-1/3”W x 2-1/2” H x 2-1/2”D and weighing only 7 ounces, The “Hear It” is designed to
be used in compact mobile installations and includes a mounting bracket, 8’ input cord with 1/8” (3.5 mm.) mini
plug, a fused DC power cord, and an instruction booklet. The unit’s standard
2.1 mm. power jack will accept 12-28 VDC at approximately 500 mA, making it
universally applicable to fixed, mobile, and even aeronautical configurations. The
small internal speaker is ideally suited to voice frequencies; for more demanding
sound requirements, an external speaker or headphones may be plugged into
the 1/8” jack provided.
GAP “HEAR IT” DSP SPEAKER
SPK05 - Our Price:
$
158
95
SPECO DMS-3P Extension Speaker
Technical Specifications:
Dimensions 7-1/4” (H) X 4-1/2” (W) X 4-3/8” (D) / Frequency Range 55 - 20,000
Hz. / Housing Black Die Cast Metal / Impedance 8 Ohm / Max Power 50 Watts /
Midrange 2” / Mounting Brackets Included / RMS Power 30 Watts / Tweeter 1” Mylar
Dome / Woofer 4” Polypropylene
SPK03 - Our Price:
$
49
95