Specifications

4
7540 Highway 64 West Brasstown, NC 28902 [phone] [phone]
fax: [phone] email: [e-mail] web: www.grove-ent.com
Technical Questions? [phone] or [e-mail]. Due to high call volume, technical calls will be limited to 3 minutes.
GROVE [phone]
RECEIVERS
ICOM R-75
FEATURES
DSP (Digital Signal Processing) The IC-R75 is capable of AF-DSP with
a factory installed DSP plug-in module. It offers noise reduction,
and auto notch filter capabilities.
Coverage: 0.03 - 60 MHz (0.1-29.99 and 50-54 MHz guaranteed)
Modes: AM, S-AM, FM, USB, LSB, CW, RTTY
Triple conversion superheterodyne receiver
The IC-R75 sports cutting edge technology for today’s serious DX’er, yet it is easy and affordable enough for
casual listener use.
Get PC control of the IC-R75 with optional RS-R75 software on CD ROM. Runs on Windows® 95; or Windows®
98 and comes with the necessary connection cable.
With its superior dynamic range of >104 dB, twin passband tuning (PBT) controls, and a large front mounted
speaker, the IC-R75 offers unparalleled receive quality.
Selectable RF gain/squelch control / Attenuator / 1 Hz tuning resolution / 2 level preamp / Selectable AGC / Three
timer functions: sleep, power OFF, power ON / Noise blanker / Single touch controls / 12 V DC Power (120
V AC adapter included) / Voice synthesizer (optional)
Supplied Accessories: AC adapter cable or DC power cable (depending on version), Spare fuse
Order RCV32
Only $609.95
Suggested Accessories:
ANT08 - Par Shortwave Antenna .......................................$59.95
ANT15 - LF Engineering H-800 Skymatch Active Antenna ...$139.00
ANT27 - LF Engineering H-900 Gain Probe Antenna ..........$189.00
SFT24 - ICOM RS-R75 Remote Control Software ...............$59.95
ACC03 - ICOM OPC-478 Computer Interface Cable ........$44.95
ICOM R9500
Within this catalog period, ICOM will announce the release to the American market the professional R9500 receiver,
featuring continuous 5 kHz-3335 MHz coverage (cellular deleted on consumer models). Its high-resolution display
doubles as a spectrum display unit and TV/video screen. Just look at these specifications:
Frequency coverage: 5 kHz -3335 MHz (3.335 GHz)
Dynamic range: 110 dB (HF)
Intermodulation distortion (IP3): +40 dBm (HF), +5 dBm (VHF/UHF)
DSP: 32 bit floating point for receiver and spectrum scope
Spectrum display span: 5 kHz (min) to 10 MHz (max)
Resolution bandwidth: 200 Hz-20 kHz
Scope attenuation: 10, 20, 30 dB selectable
Noise blanker: DSP with selectable memory for each channel’s attenuation width, depth and blanking time
Digital IF filter: Adjustable shaping, bandwidth, center frequency characteristics, twin pass band tuning
IF roofing filters: 5 filters with selectable 240, 50, 15, 6 and 3 kHz widths
Detection modes: AM, AM synch (selectable sideband), USB, LSB, CW, FM, WFM
Dual-notch filter: 70 dB attenuation of two heterodynes with wide, middle, narrow bandwidths
VFO: 10 separate with storable frequency, mode, filter bandwidth and more
Digital audio recorder: Up to 60 minutes in highest quality, longer at lower quality
Memory channels: 1000 frequencies, modes, filter bandwidths and tuning steps; USB port accessible
AFC: tracks FM frequency shifts
Scan rate: 40 channels per second
Scanning schemes: Memory, program, frequency, priority, mode,
auto memory write
Outputs: Voice squelch control (VSC), S/PDIF, Analog TV (NTSC/
PAL), video in/out
Options: P25 digital demodulator, CI-V interface, RS232C
Pricing and availability not known at print
time. Check back at www.grove-ent.com
for up-to-date information.