User manual

4
1. Introduction
Dear Customer,
Thank you for purchasing the PRO-BOT 128. This mobile robot is equipped with a programmable microcomputer, which allows you to define the
behaviour and the basic reactions of the robot to external stimulations. We developed the PRO-BOT128 with the aim to meet the high expectations
of our customers regarding quality and function.
If you purchased the assembly kit, the concept of the PRO-BOT128 was designed in such a way that experienced electronic technicians as well
as beginners can assemble and commission it in just a few hours. Apart form the circuit board, the robot only contains standard parts that can be
processed with normal fine motor skills and easy to obtain components. The PRO-BOT128 is therefore perfectly suited for hobby constructors
who want to become involved in process-controlled circuits, for pupil and student projects, advanced education or adult education centers.
Besides its C-Control PRO 128 RISC processor, the Pro-Bot 128 has two motors, which can be controlled independently of each other, an
optical line tracing unit, an optical collision detector, two rotary speed sensors for the wheels, four visual display LEDs, a 64k EEProm, an
acoustic sensor, two light sensors, and the possibility to measure and control its own operating voltage as a special feature.
This product meets the requirements of current statutory, European and national guidelines. The CE requirements must be observed when using
this product.
This user manual is part of this product. It contains important details concerning operation and handling. Bear this in mind
when you pass on this product to others.
Therefore, keep this user manual for future reference.
Prior to commissioning the PRO-BOT128 or connected devices, please read this entire instruction manual carefully! It
explains the correct use and points out possible risks.
Any company or product names are trademarks of their respective owners. All rights reserved.
In case of any technical inquiries, contact or consult:

Tel. no.: +49 9604 / 40 88 80
Fax. no.: +49 9604 / 40 88 48
E-mail: [e-mail]
Mon. to Thur. 8.00am to 4.30pm, Fri. 8.00am to 2.00pm