User manual

e) Required tools

To assemble the PRO-BOT128 correctly (kit version), you need the following tools and materials besides the components (not part of the

delivery!):

• Stanley knife or saw

• Fine pointed pliers

• Side nippers (electronic side nippers)

• Small vice or so-called "third hand"

• Soldering iron



Here you should use an electronic soldering iron (ca. 20W to 40W) or better a soldering station (at least 50W). Large 300W soldering

irons are suitable for work on gutters and drains, but not for robot assembly kits!

• Solder, 1 mm thick electronic solder, may also be lead-free

• Unsoldering wire (approx. 2-3mm wide)

• Sandpaper with a fine grain

• Instant, two-component or hot glue

• Small hammer

• Multimeter

• Computer: PC with Windows 2000, XP, Vista