Instructions

89 C-Control Pro IDE

Example FET driver with load controlled by P53

USB to UART Converter

The pins on the socket connector Y5 (4 pin) are connected to the UART to USB converter (Silabs

CP2104). At the USB connector (type B) the board is connected to the PC. The converter is used for

serial data output from the Unit to the PC.

Install the driver first before making a connection.

The drivers for the converter module can be found at:

http://www.silabs.com/PROducts/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

http://www.silabs.com