Instructions

67 C-Control Pro IDE

2.2.3 Module

The C-Control Pro AVR32Bit UNIT (Conrad Order No.: 192573) is currently the fastest microcontrol-

ler unit of the C-Control Pro family (Atmel AT32UC3C1512C). The unit is equipped with a powerful

AVR32 32-bit DSP microcontroller with FPU (Floating Point Unit) for the calculation of floating point

numbers. This microcontroller has been specially designed for industrial and automotive applica-

tions, thus meeting a high standard of performance and reliability. The C-Control Pro AVR32Bit UNIT

has already a wealth of facilities to peripheral, a web server, CAN-, µ SD-, USB interface and much

more is included for programming and debugging on this small unit.

To operate the UNIT you only need a stabilized 3.3V / 200mA power supply and a mini-USB cable to

the Unit to connect to your PC. The easiest way to do this for development purposes is with the op-

tional application board (Conrad Order No.: 192587). This board is specifically designed for the devel-

opment of hardware and software and provides already a variety of additional peripherals.

For rapid prototyping and small series also the AVR32Bit Mainboard (Conrad Order No.: 192702)

can be used. This board can be expanded with additional boards depending on the application.

The programming of the AVR32Bit UNIT is made in the for several years proven and constantly im-

proved C-Control Pro development environment in Basic, CompactC and graphically.

The Unit provides the following features:

Powerful 32-bit microcontroller (91MIPS internal) 66 MHz clock

512 KB high-speed FLASH (160 KB reserved for interpreter)

64 KB high-speed SRAM (14 KB reserved for interpreter)

1x CAN bus (2.0A & 2.0B) with CAN driver + jumper enabled terminator

2x SPI interfaces

1x I2C (TWI)

2x voltage reference input for ADC

1x 16-channel 12-bit ADC

1x USB interface (Mini USB) for programming and debugging

3x USART interface (serial interface)

1x External I2C EEPROM 512 Kbit

1x Real Time Clock (RTC) with 32.768 kHz clock crystal

1x LAN interface (external LAN port)

1x µ SD card holder (supports SDHC)

1x reference voltage input for DAC

2x Analog comparator

1x 4-channel 20-bit PWM Controller

2x 16-bit timer with 3 channels

7x interrupt inputs

57x digital inputs outputs (depending on the use of the other functions)

Jumper selectable Autostart option

Start-stop button

Reset button

2 pin connectors, each with 2x23 pins in pitch 2.54mm

Pinout in pitch 2.54mm, also ideal for breadboards