Instructions

64Hardware

2.2.1.2 USB

Driver Installation

Now connect the Unit with the supplied mini-USB cable to the PC (the cable is enclosed the Ap-

plicationboard or Mainboard). The PC is trying to install a driver for a "C-Control Pro AVR32"

device. You can find the appropriate driver in the directory USB Driver\ AVR32 USB Driver in the in-

stallation directory of the C-Control Pro IDE.

If all the connections are made, start the IDE.

In the IDE the corresponding COM port (virtual serial port) must be selected. Check first in the win-

dows device manager, which was the assigned COM port number (see illustration).

Picture device manager Comport

Drivers and software for the C-Control Pro do not support Windows operating system before

Windows 2000.

Press the reset button on the C-Control PRO AVR32Bit UNIT. In the output of the IDE should now

appear the following message:

C-Control PRO IDE output after successful

installation of the UNIT