Instructions

406FAQ

3. I need more ports for my hardware application. Many ports are used by other functions.

Take a look at the Pin Assignment of the AVR32Bit. You can use all ports that have no special

AVR32Bit Module functionality (not connected to I2C, SPI, MACB etc). Do not forget to remove

the jumper that connects the port pins to the application board (e.g. for LED's or Button's). Other-

wise the behavior can be undetermined.

4. I cannot reset the module or a transfer of the interpreter after a software update no longer works.

A power cycle brings the module securely back to the boot loader to allow a Reset Module. See

Firmware.