Instructions

144IDE
© 2013 Conrad Electronic
3.3 C-Control Hardware
Under menu item C-Control all hardware relevant functions can be executed. These include transfer
and start of the program on the hardware as well as password functions.
3.3.1 Interface Selection
In the toolbar the COM interface that addresses the C-Control Pro module can be directly selected in
a drop-down menu.
In this list all interfaces are labeled COM, regardless of whether it really is a serial port or a USB-
connected virtual comport.
The menu entry Search Unit searches for connected C-Control Pro modules. The function Refresh
COM looks for changes of the connected COM interfaces. If for example a USB cable is connected,
and a new COM port is available.
A click on the plug icon turns the COM port off (red cross), another click on again.
The green "LED" display indicates that the COM Port is open. If the indicator is red, the COM Port is
closed.
An open COM Port (green) does not necessarily mean that a C-Control is connected, it could
be another device e.g. a USB-serial converter. Only a Search Unit checks whether there is a con-
nected C-Control module,