Instructions

124Hardware

2.2.12 USB-Board

The C-Control PRO AVR32Bit USB-Board (Conrad Order No. 192688) is designed to expand the

functionality of the C-Control PRO AVR32Bit products. The product is configured as open circuit

board. It is equipped with a USB Type-B connector and a 3-pin header connector (pitch: 2.54mm) for

connection to a 3.3V UART interface of the C-Control PRO AVR32Bit.

Connection and Commissioning

Make sure that before you connect the modules to your C-Control PRO system all connections to

connected devices are separated and voltage free. The C-Control PRO AVR32Bit UNIT has several

UART interfaces (see manual) that can be connected to the USB board. On the boards, e.g. Applic-

ationboard or Mainboard, are the UART interfaces accessible through contacts at which the board

can be connected. The USB board acts as an interface between the UNIT UART interface and a PC

USB port to share data.

Under the following link you can download the driver for the product: http://www.sil-

abs.com

PCB Overview