Instructions

98Hardware

Matching connection cable pre-assembled (length 35cm) Order No. 198876

1-WIRE

At the screw clamp labeled "1WIRE" the pin P3 of the UNIT is led out. At this pin a 1-WIRE sensor

such as a temperature sensor (Conrad Order No. 198284) can be connected. This pin can also be

used as a normal digital input/output.

PORT-1, PORT-2

At the 26-pin pin header connectors labeled "PORT 1" and "PORT 2" the free pins are brought out of

the AVR32Bit UNIT. Here, the experiment board (Conrad Order No. 192615) can be connected to the

pin headers via two 26-pin ribbon cables.

Ribbon cable 26-pin RM1.27 0.05mm²: Order No. 607222

Pin header connectors 2x13 RM:2.54mm: Order No. 742185

Available pins at pin header connector PORT-1:

P5, P6, P7, P8, P9 , P10, P11, P12, P13, P14, P15, P16, P17, P18, P19, P20, P21, P22, P23,

P24, P25, P26, P27, P28, +3.3V, GND

Available pins at pin header connector PORT-2:

P29, P30, P31, P32, P33, P36, P37, P38, P39, P41, P42, P43, P44, P45, P46, P47, P48, P49,

P50, P53, P54, P55, P56, P57, +3.3V, GND

This product complies with the applicable national and European requirements. The "I2C bus" is a

registered trademark of Philips Semiconductors. All other company and product names mentioned

The cooling surface at the voltage regulators (near the mini-USB socket of the UNIT) be-

comes hot during operation!

Technical Data

power supply external

7,5VDC / 500mA (stabilized)

power supply internal

3.3V and 5V

environmental temperature

0 to 60°C

dimensions

110x95mm

weight ohne UNIT

approx. 65g

Scope of Delivery

1x C-Control PRO AVR32Bit Mainboard

1x Mini-USB cable