Instructions

36
4. Send SMS Command (OUTSMS)
Atextmessagecanbesentoutautomaticallytotriggeranactionatanotherproductincaseofalarm.Thetextmes-
sagecontentisadjustedtotheregularsizeofaGXproductcommand.Thecommandforthisis:
SET OUTSMS <TelNr> <TEXT> #1513
TelNr: NumberofanotherGSMproduct.
Text: Thetextmessagecontentincludingspaces.Max.length:59characters.
Example:
SET OUTSMS +49112233… SET OUT3 #1234 #1513
Nowtherelayintheproductwithphonenumber+49112233…issetwhenanalarmistriggered.
Thisphonenumberhasnothingtodowiththephonebookandissavedseparately.
Therequirementstothephonenumbercorrespondtothoseofthephonebook(internationalformat,etc…).
TESTandRESETrequeststhecurrentconrmationaccordinglyandresetsthemtoDEFAULT<off>.
g) System Functions
Thischapterdescribestechnicallysophisticatedfunctions.Thefactorysettingsarealreadysetformostapplication
areas.Therefore,werecommendonlyadjustingtheseparametersintherespectiveapplicationcases.
Iftheproducthasanymalfunctions,rstresetthefactorysettings.
Ifyou needto contactthe hotline,ensure thatthe deviceis backin itsstandard conguration (factory
settings).
1. Time between Two Alarm Messages (IDLEALARM)
Incaseofalarm,theproductwillsendanalarmmessage.Fromthistimeonwards,atimewindow(idlewindow)starts
forthisinput;duringthistime,nootheralarmcanbetriggered.Thisreducesthetextmessagecostscausedbyan
incorrectly set product. Every alarm source has its own idle time window. A value of 5 minutes is set in the factory for
the idle time window.
SET IDLEALARM <Time> #1513
Time: 1-240minutes
Example:
SET IDLEALARM 15 #1513
Theperiodbetweenalarmmessagesisnow15minutes.
Inthistimewindow,youwillnotreceiveanynewmessagesonalarmsituationchanges.Withinthisperiod,however,
every user is able to check his parameters.
TEST IDLEALARM #1513
Readingtheconguration