Instructions

32
3. Switching At Alarm (ALARM)
Thisisafunctionforthealarmmode.Incaseofalarm(e.g.IN1wasswitched),thiscommanddetermineswhatto
doinadditiontotheALARM-SMSandEMAIL.Thisproductpermitsdeningtherelaysforautomaticswitching.The
commandforthisis:
SET ALARM <OUTx> [<OUTy>] [<OUTz>] [<TIME>] #1513
 Time: Howlongshouldtherelayswitch,inseconds
   Maximumtime:300seconds
   Specialvalue/default:0=onlyactivation(seebelow)
Examples:
SET ALARM OUT1 OUT3 #1513
Sincenotimewasindicated,„0“isusedautomatically.Therelays1and3switchatALARMandremainactivateduntil
ALARMDISABLE#1513issent.
TESTandRESETrequeststhecurrentconrmationaccordinglyandresetsthemtoDEFAULT<off>.
 RELAYTIMEhasthehigherpriority.Whenthesettimeislower,RELAYTIMEisusedautomaticallyasthe
switching time.