Instructions

24
Tolearnwhatphonenumberisplacedinaspecicmemoryslot:
TEST TEL 11 #1513
Ifanemptymemoryslotwasselected,thefollowingwillbereturned:
GX155 1.00
 Tel11Name:
 Tel11Nr:
 Tel11Group:G1
Tolearnthememoryslotsonwhichaphonenumberwassavedandwhichgroupsitthereforebelongsto:
TEST TELNUMBER [phone].. #1513
Apossibleanswerwouldbe:
GX155 1.00
 TelNr:[phone]..
 TelPos:1,5,8,10
 TelGrps:G1,G2,G3,G5
Thefollowingcommanddeletesamemoryslot:
RESET TEL <Nr> #1513
 Nr: Thememoryslotnumbertobedeleted
Thefollowingcommanddeletesaseriesofnumbers:
RESET TEL <Nr> to <Nr> #1513
Ifaspecicphonenumberistobedeleted:
RESET TELNUMBER <TelNr> #1513
Observe that deletion of a memory slot will cause the memory to be resorted. When 4 numbers are saved
andthe2ndnumberisdeleted,the3rdand4thmoveuponeposition.Thisiswhynamesneedtobeas-
signed.
Usethefollowingcommandtodeletetheentirememory:
RESET TELALL #1513
USB and RS485 also offer the command TEST TELALL #1513,whichreturnstheentirephonebookwith
positionnumber,name,phonenumberandgroup.