Instructions

18
Status display:
TheSTATUScommandisusedtogetanoverviewofalltheimportantconditions,settingsandmodesatonce.Thean-
swersummarisesalltheimportantinformation.Therefore,thiscommanddeviatesfromthegeneralcommandformat.
STATUS #1513
Anexampleforananswerispresentedinthefollowing(deviationspossibledependingonrmwareversion).
 Answer:
 GX1551.00 Productname,rmwareversion
 Alarm:OFF Currentalarmmode
 GSM:78% GSMsignalstrength
 Temp:20.5C Devicetemperature
 IN1:low CurrentlevelattheswitchinginputIN1
 IN2:low
 IN3:low
 IN4:low
 IN5:low
 OUT1:OFF CurrentswitchingconditionattheOUT1relay
 OUT2:OFF
 OUT3:OFF
 BLOCK:OFF CurrentstatusfortheBLOCKmode