Instructions

13
7. Commissioning - First Steps
 Priortocommissioningoftheproduct,checkwhetheritisgenerallysuitedfortheintendedapplication!
 Incaseofdoubt,alwayscontactaspecialist,expertorthemanufactureroftheproductused!
The following is needed for operation and conguration of the device:
• AcommonmobilephonewithitsownSIMcardforcongurationandcontroloftheGX155andtochangetheSIM-
PIN of the device SIM card
• An additional device SIM card for the GX155
The following is required for conrmation via PC and for any rmware update:
• Mini USB cable
• PC or notebook with Windows operating system and at least one USB2.0-port
• OfciallyreleasedPCsoftware(seedownloadareaontheproductwebsiteatwww.conrad.com)
a) Changing the PIN Code to „1513“
EverySIMcardhasaPINcode.BecausethisGSMproductusesitsownPINprocessing,theSIMcardPINcodemust
be changed to that of the product.
The following steps are required for this:
• TheSIMcardintendedfortheproductmustbeinsertedinanymobilephone.
• Accordingtotheoperatinginstructionsofthemobilephone,thePINcodemustbechangedto1513.
• TheSIMcardwiththechangedPINcodemustberemovedfromthemobilephone.
• TheSIMcardwiththechangedPINcodecannowbeinsertedintotheproduct.