Instructions

12
c) Notes on Use
• Thereisnoprescribedassemblyposition.
• WhenusingtheUSBsocket,observethatthecableislongenough.Lateralforcesontheplugged-inplugscanlever
thesocketsfromthePCBandthuscauseirreparabledamage,lossofwarranty/guarantee!
• Towarrantthedevicefunction,chooseasiteofusewheretheGMSnetworkreceptionisasgoodaspossible.
• Theproduct mustnot besubject tocontinuous strongvibrations (e.g.vibrating machines, directmotor/chassis
contact).
• Theproductisnotprotectedagainstweatherandthereforemustbeinstalledinside.
• Use of wire-end sleeves is generally intended for.
• Theexternalcablesmustbekeptasshortaspossibleandremaininglinelengthsmustnotbecoiled.
• Too-strong temperatureuctuations may leadto temporaryimpairment andrequire manual„Reset“ inextreme
cases.
• Theproductisnotintendedforthe„Safety“areaandalsodoesnotcorrespondtoanySIL/ASILlevel.