User manual

ManualsBrandsC-CONTROL ManualsRobotsRobotic arm gripper set CCR-45 Version: Assembled

31 / 34

Infrared

Reflective

Sensor

#n M2304 P3\n Deinit

3, 4, 5,

8, 9

$n ok \n

#n M2305 P3 N19\n Init Module 19 in Port 3

3, 4, 5,

8, 9

$n ok \n

#n M2306 P3 V1000\n

Set report interval (ms)

3, 4, 5,

8, 9

@11 P3 N19 V1\n

1: object detected

0: no object

detected

20 EMG Detector

#n M2304 P1\n Deinit

1, 2, 13

$n ok \n

#n M2305 P1 N20\n Init Module 20 in Port 1

1, 2, 13

$n ok \n

#n M2306 P1 V1000\n

Set report interval (ms)

1, 2, 13

@11 P1 N20

V583\n

21 OLED 12864

#n M2304 P0\n Deinit 0 $n ok \n

#n M2305 P0 N21\n Init Module 21 in Port 0 0 $n ok \n

#n M2307 P0 M0\n

Set display mode

0: 16X8

1: 32X16

2: 64X32

0 $n ok \n

#n M2307 P0\n Clear screen 0 $n ok \n

d. Different modes for uArm Swift Pro

Since different types of the end-effectors have different length and height, so we designed the command

M2400, which could help us to fit the uArm into different situations easily. With this command, there is no

need to concern about how to adjust the parameters for different situations.

Currently we offer 4 kinds of mode:

M2400 S0 : Normal mode (end-effector tools: suction)

M2400 S1 : Laser mode (end-effector tools: laser)

M2400 S2 : 3D printing mode (end-effector tools: hot end)

M2400 S3 : Universal holder mode (end-effector tools: universal holder)

For the gripper, there is no special mode since gripper has the fingers and can rotate horizontally.