User manual

29 / 34
#n M2306 P1 V1000\n Set report interval (ms)
1, 2, 13
@11 P1 N7 V583\n
8 Sound Sensor
#n M2304 P1\n Deinit
1, 2, 13
$n ok \n
#n M2305 P1 N8\n Init Module 8 in Port 1
1, 2, 13
$n ok \n
#n M2306 P1 V1000\n Set report interval (ms)
1, 2, 13
@11 P1 N8 V583\n
9
6-Axis
Accelerometer &
Compass
#n M2304 P0\n Deinit
0
$n ok \n
#n M2305 P0 N9\n Init Module 9 in Port 0
0
$n ok \n
#n M2306 P0 V1000\n
Set report interval (ms)
XYZ is the rotation angle of
each axis.
H is the clockwise angle
between the magnetic north
and x-axis
T is the clockwise angle
between the magnetic north
and the projection
of the positive x-axis in the
horizontal plane
0
@11 P0 N9 X2.0
Y2.0 Z2.0 H2.0
T2.0\n
10 Color Sensor
#n M2304 P0\n Deinit
0
$n ok \n
#n M2305 P0 N10\n Init Module 10 in Port 0
0
$n ok \n
#n M2306 P0 V1000\n Set report interval (ms)
0
@11 P0 N10 R218
G31 B128\n
11 Gesture Sensor
#n M2304 P0\n Deinit
0
$n ok \n
#n M2305 P0 N11\n Init Module 11 in Port 0
0
$n ok \n
#n M2306 P0 V1000\n Set report interval (ms)
0
@11 P0 N11 V1\n
1: right
2: left
4: up
8: down
16: forward
32: backward
64: clockwise
128:counter
clockwise
12 Ultrasonic
#n M2304 P3\n Deinit 4, 8, 9 $n ok \n
#n M2305 P3 N12\n Init Module 12 in Port 3 4, 8, 9 $n ok \n
#n M2306 P3 V1000\n Set report interval (ms) 4, 8, 9
@11 P3 N12 V4\n
Value in cm