User manual

28 / 34
E25 Operation failure
Grove modules
Grove
Num
Module Commands Description
Support
Ports
Return
1
Chainable RGB
LED
#n M2304 P3\n Deinit 3, 4, 5 $n ok\n
#n M2305 P3 N1 V2\n
Init Module 1 in Port 3. V is
the number of LEDs
chained.
3, 4, 5
$n ok\n or E25 init
fail
#n M2307 P3 V0 R228
G128 B100\n
Set the color of 0
th
LED 3, 4, 5 $n ok\n
2 Button
#n M2304 P3\n Deinit 3, 4, 5
#n M2305 P3 N2\n Init Module 2 in Port 3 3, 4, 5
Press down @11 P3 N2 V0\n
Click @11 P3 N2 V1\n
Long pressed @11 P3 N2 V2\n
3
Slide
Potentiometer
#n M2304 P1\n Deinit 1, 2 $n ok \n
#n M2305 P1 N3\n Init Module 3 in Port1 1, 2 $n ok \n
#n M2306 P1 V1000\n Set report interval (ms) 1, 2 @11 P1 N3 V583\n
4
Vibration Motor
#n M2304 P3\n Deinit
3, 4, 5,
8, 9
$n ok \n
#n M2305 P3 N4\n Init Module 4 in Port 3
3, 4, 5,
8, 9
$n ok \n
#n M2307 P3 V1\n V1: turn on; V0: turn off
3, 4, 5,
8, 9
$n ok \n
5 Light Sensor
#n M2304 P1\n Deinit
1, 2, 13
$n ok \n
#n M2305 P1 N5\n Init Module 5 in Port 1
1, 2, 13
$n ok \n
#n M2306 P1 V1000\n Set report interval (ms)
1, 2, 13
@11 P1 N5 V583\n
6 Angle Sensor
#n M2304 P1\n Deinit
1, 2, 13
$n ok \n
#n M2305 P1 N6\n Init Module 6 in Port 1
1, 2, 13
$n ok \n
#n M2306 P1 V1000\n Set report interval (ms)
1, 2, 13
@11 P1 N6 V583\n
7
Air Quality
Sensor
#n M2304 P1\n Deinit
1, 2, 13
$n ok \n
#n M2305 P1 N7\n Init Module 7 in Port 1
1, 2, 13
$n ok \n