Datasheet

ManualsBrandsC-CONTROL ManualsRobotsRobotic arm gripper set CCR-45 Version: Assembled

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

This product was developed as an experimental platform for all persons wich are

interested in robotics. This robot arm is also not industrial robot arm, with industrial

specications and performance!

• Do not interfere with the movement of the robotic arm. It may cause damage the

mechanics or electronics and void the warranty/guarantee!

• Program the robotic arm in such a way to prevent mechanical overloading (e.g.

when the gripper arm is pressed against a wall or a heavy object).

• Before replacing an attachment on the robotic arm (e.g. gripper arm, suction cup,

etc.), switch off the robotic arm and disconnect it from the power supply. The same

applies to plugging or unplugging of extensions at the connections of the robotic

arm.

• Before attaching extensions to the robotic arm, make sure they are suitable.

Please read the documentation for the product at www.ufactory.cc.

Unsuitable extensions may damage the mechanics or electronics and void the

warranty/guarantee!

Maintenance and care

• The product is maintenance-free for you. The product contains no parts that require servic-

ing. Therefore, do not open/dismantle it. Maintenance or repair may only be performed by

qualied personnel or a specialised repair shop.

• Before cleaning, disconnect the device from the power supply. Completely remove the mains

plug from the socket in the wall

• Use a clean, dry and soft cloth for cleaning.

• Dust can easily be removed using a clean, soft, long-bristled brush and a vacuum cleaner.

Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions

since these could damage the housing or even impair operation.

Disposal

Electronic devices are recyclable material and do not belong in the household

waste. Dispose of an unserviceable device in accordance with the relevant statutory

regulations.

Declaration of conformity (DOC)

We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this

product conforms to the 2014/53/EU directive.

The full text of the EU conformity declaration is available via the following Internet

address:

www.conrad.com/downloads

Select a language by clicking a ag symbol and enter the order number of the prod-

uct in the search eld; then you will be able to download the EU declaration of

conformity in PDF format.

Technical data

a) Power adapter

Operating voltage ......................... 100 - 240 V/AC, 50/60 Hz

Output ........................................... 12 V/DC, 5 A

Protection class ............................ I

b) Robotic arm

Operating voltage ......................... 12 V/DC

Bluetooth

version ........................ 4.0

Frequency range .......................... 2400 - 2483,5 MHz

Transmission power...................... 0 dBm

For all other technical data, please refer to the manufacturer‘s current information at