User manual

36 / 56
3) Adjust Zero Point
 IMPORTANT:
Please adjust zero point before drawing/engraving.
Ensure the pen/laser is TOUCHING the platform.
For laser engraving, you can also adjust the speed of engraving.
4) Start drawing/engraving!
4.3D Printing
Preparation
1) Download CuraForuArm
2) Double-click .dmg/.exe file to install.
3) Enter the 3D Printing section in Studio, and CuraForuArm window
will pop up automatically. If not, click the “Open Cura” button.
CuraForuArm Interface