Manualshelf

User manual

ManualsBrandsC-CONTROL ManualsRobotsRobotic arm gripper set CCR-45 Version: Assembled
31323334353637383940
31 / 56
Step 9 : Connect the USB port and power port of uArm, press the power
button and open a serial monitor (for example Arduino IDE).
Step 10 : Adjust the settings (newline & 115200 baud) and then send the
M2500 command which will switch the main UART port from USB to the
port of OpenMV.
Step 11 : Move the object slowly, and the arm will follow it.