User's Manual

Pin Color Signal
1 red Unlock
2 orange Lock
3 yellow Reference voltage in
4 green 3V power for Remote control battery
5 blue Remote Control battery ground
Mounting the parts
It is critical that the mounting position of the unit is in accordance with the local government standards in the
operational region of the vehicle.
Mounting of the components on the windshield is only allowed at specific locations, mainly the corners
(Europe: EU standard 77/649/EWG). The mounted components cannot impair the sight to relevant areas
outside the vehicle.
All components have to be placed, that in case of accident the passengers can not get injured by sharp
corners or edges (EU: all parts, touchable with a bowl of 165 mm diameter in its installed position, muss
have radii of >= 2.5 mm, 74/60/EwG).
All components have to be placed in a way, that they can not get touched by exploding airbags and so, that
the function of the airbags will not be affected.
All components have to be placed so, that they do not affect the
adjustable elements of the vehicle (e.g. interior mirror, steering
wheel, o its adjustment system, seat adjustment, glove compartment
cover) and so, that the parts and wires of C-Compact cannot get
damaged by such components.
Mounting C-Compact main unit:
If using the RFID reader the unit is the standard
mounting place in a car is in a corner at the inside of the
windshield. Otherwise it can be mounted in other places,
where GSM and GPS signal is available (e.g. under
plastic covers of the dashboard).
Convadis AG, Stroppelstrasse 20, CH-5417 Untersiggenthal, Tel + 41 56 290 35 45, [e-mail], www.convadis.ch 8/10