User's Manual

Installation:
The unit includes a 10 pin conector with multiple hw configurable signal routing options
and an additional connector for connectiong remote keys of the car (for lock/ unlock and
for immobilizer function on cars with keyless start system).
For easy connecting to the vehicle harness (12V power and data) a connector to the On
Board diagnostic connector or the vehicle (OBD) is avaialble. If the signals are readable
from there and together with "C-Port" no other electric connection to the vehicle is needed.
Convadis AG, Stroppelstrasse 20, CH-5417 Untersiggenthal, Tel + 41 56 290 35 45, [e-mail], www.convadis.ch 4/10