User's Manual

- Now tap the job in the vehicle list in the smartphone. It will now be sent to the vehicle. The LED
now lights up green.
- The device now establishes a connection to the CCom server and obtains the previously defined
vehicle-specific device configuration from there. If necessary, the firmware on the device is also
updated (duration approx. 10 minutes). Status messages appear in the app.
- At the end the LED goes out. "Synchronization complete" is displayed in the app.
Final test and documentation
In order to ensure, that the device works properly, it is essential to carry out a complete function
test after each installation in accordance with our document "CBox Compact final test.pdf"
(available in CComE dokument server (folder„General“ - „C-Compact“). Check all functions
according to this document and fill in the test results accordingly.
If the installation si done different than documented inside the vehicle-specific installation manual,
both your customer and Convadis require the relevant information in order to be able to provide
reliable support and locate the problem in an emergency. Please forward the information. Convadis
will then include the variant into the installation manual and make it available to all installers.
Additional info
For aditional info about the user functions, please check our Wiki (wiki.convadis.ch) or
contac us Tel. [phone]. Email: [e-mail]
Convadis AG, Stroppelstrasse 20, CH-5417 Untersiggenthal, Tel + 41 56 290 35 45, [e-mail], www.convadis.ch 10/10