User manual

C-COM Satellite Systems Inc. Page 80 of 128
iNetVu™ 7000 Controller User Manual
Revision 1.19
Satellite Modem Communication Status
Indicates the Transmitter status and displays any issues in communication with the
Satellite Modem
 Checking Modem
Verifying Satellite Modem’s current status
 Transmitter Enabled
Indicates that the transmitter has been enabled.
 Transmitter Disabled
Indicates that the transmitter has not been enabled.
 Transmitter Standby
Transmitter becomes idle during the ACP Test.
 Modem Failed
A communication failure with the Satellite Modem has been detected.
GPS Status
Displays condition of the GPS signal
 GPS Normal
GPS signal is being received from the GPS Antenna.
 GPS Failed
GPS signal is not being received from the GPS Antenna.
 GPS Searching
iNetVu™ Mobile Software attempts to detect a GPS signal from the GPS
Antenna for 2 minutes.
 GPS Override
GPS coordinates have been manually overridden from the Maintenance menu.
Controller Status
Displays communication status between the PC and the iNetVu™ Controller
 Controller Normal
Indicates normal communication status between the Controller and the PC
 Controller Failed
A failure in communication between the Controller and the PC has been
detected.
Motor Status
Displays the movement of the 3-axis motors: Elevation, Azimuth, and Polarization
 EL Moving UP / DN
Elevation Motor is moving in the respective direction
(UP = Up, DN = Down)
 AZ Moving Left / Right
Azimuth Motor is moving in the respective direction
 PL Moving CCW / CW
Polarization Motor is moving in the respective direction
(CCW = Counter Clock-Wise, CW = Clock-Wise)
 Motor Unknown
Motor Status cannot be detected.