User manual

C-COM Satellite Systems Inc. Page 63 of 128

iNetVu™ 7000 Controller User Manual

Revision 1.19

6.6.4.4. DPLY_C

1 – Elevation Movement

User-defined target elevation angle of for compass reading

2 – Polarization Movement

User-defined target polarization angle for compass reading

3 – Azimuth Movement

User-defined target azimuth angle for compass reading

4 – Check Compass at specified target point.

Tests the compass’ heading and accuracy at the user defined Elevation, Polarization, and Azimuth

angles, by rotating the antenna at 90 intervals and comparing the compass readings with the

actual antenna’s movement. This function is mainly used for testing purposes.

Antenna will move to the target Elevation, Polarization, and Azimuth for reading the compass

heading such that the user can determine if the compass reading is accurate at that point.

6.6.4.5. A_ACP

Initiates an automatic cross-pol test.

6.6.4.6. M_ACP

Initiates a Manual cross-pol test.

6.6.4.7. S_ACP

Stops the cross-pol testing instantly.

E: +20 P+60

A +180 CP T