User manual

C-COM Satellite Systems Inc. Page 121 of 128
iNetVu™ 7000 Controller User Manual
Revision 1.19
9.2. How to Set Network Configurations on your PC
1. Open Network Connections, right-click your
network card, and select Properties.
2. Select Internet Protocol (TCP/IP) and click
Properties.
3. Direct Network Connection:
Set your PC to the same subnet as the iNetVu™ 7000
Controller, and the Default Gateway to the iNetVu™
7000 Controller.
The screenshot depicts this configuration.
Network Connection via Router/Switch:
Dependent on Network Configuration (See previous
section)