User manual

C-COM Satellite Systems Inc. Page 116 of 128
iNetVu™ 7000 Controller User Manual
Revision 1.19
8.5. Firmware/Satellite Table Update
To access the firmware update, and satellite table update screen, perform the following
steps:
1. After establishing a proper network connection between the controller and the
PC, press the “reset” button on the 7000 Controller, and hold the “↑” and “↓”
buttons on the front panel at the same time until you read “Firmware/Sat update”
on the LCD screen.
2. Open up a web browser, and type the 7000 Controller IP address into the URL
address field. The following screen should appear. Type in “password” in the
Password field.
Fig. 83: Firmware/Satellite Table update screen