User manual

C-COM Satellite Systems Inc. Page 105 of 128
iNetVu™ 7000 Controller User Manual
Revision 1.19
Demo / Test
Opens System Test and Demo menu screen
Log File
Automatically opens the iNetVu Data Log File in Notepad.
Load Firmware
Loads the iNetVu_Box.s19 firmware file into iNetVu™ Controller from
the iNetVu program folder.
The update process is displayed on screen and will notify the user when
the process is complete. The controller will be unavailable during this
time.
Write EPROM
Sends and writes ALL
the parameter’s to the iNetVu™ Controller’s
EPROM.
Read Registry
Reads ALL
parameters from the local registry and sets the values into the
iNetVu™ Mobile Software
Send All
Sends ALL
parameters to the controller’s memory. The system will
prompt the user and ask whether to save these parameters to the
EPROM.
Read All
Reads ALL
parameters from the iNetVu™ Controller’s EPROM memory
and sets the values into the iNetVu™ Mobile Software
Update SatPara
Loads all the Satellite Transponder information located in the
“iNetVu70000_SatParam” text file, into the 7000 Controller. The user may
modify the table with any DVB transponders that he/she would like saved
in the 7000 Controller, and click on this button.
Get LogData
Uploads the log data from the 7000 Controller onto the user’s PC. The
user may select how much of the log file to upload from the Controller
section of this maintenance menu. The maximum data a user may upload
is 12 hours.
Resets the iNetVu
TM
7000 Controller.