Troubleshooting guide

iNetVu Troubleshooting Guide
C-COM Satellite Systems Inc.
Page 84 of 88
The following document is a general guide that will assist you if you are unable to find satellite.
Possible Causes:
• Improper Configuration
• Line of Sight (coverage)
• Faulty RF Hardware
Step 1:
• There must be no RED/YELLOW indicators on the Controls Screen of the iNetVu 7000 software.
• The Modem and Controller must be communicating as shown above. If they are not please refer to
“No Modem Communication” in this Guide. Configure for NA if no modem is to be used.