Troubleshooting guide

iNetVu Troubleshooting Guide
C-COM Satellite Systems Inc.
Page 80 of 88
ERROR 0X8801 - No Modem Communication
Modem Status Definitions:
• No Modem Communication: (Error Code---0x8800---0x88FF Network/UART Reset)
Communication between controller and modem has not been established
• Modem TX Disabled:
Communication between controller and modem is active with Transmitter Disabled
• Modem TX Enabled:
Communication between controller and modem is active with Transmitter Enabled
1. Ensure the Connection Type and iNetVu 7000 Software are configured correctly for your
service. Please refer to the iNetVu 7000 Cabling & Configuration Guides for more details.