Troubleshooting guide

iNetVu Troubleshooting Guide
C-COM Satellite Systems Inc.
Page 46 of 88
e. From the Controls Screen the AZ and PL Angles should be close to 0.00 as seen below.
Ensure the AZ ST, and PL ST are activated
f. If the angles are still incorrect, identify the specific axis that is flashing Red/Yellow.
Example A: AZ Sensor Error Example B: PL Sensor Error
g. Once the specific axis has been identified proceed to troubleshooting that angle by testing
of the individual components.
In this document please see:
Polarization Sensor Error
Or
Azimuth Sensor Error