Instructions / Assembly
8
1. Determine the wanted height or look of the fixture with the provided stems, and
assemble them by screwing them together.
2. Screw the canopy to the fixture body.
4.Connect the light source cable to the driver
5. Pull out the source wires from the outlet box. Make wire connections using wire
nuts as follows:
--Connect the white wire from the fixture to the white wire from the power source.
--Connect the black wire from the fixture to the black wire from the power source.
--Attach the fixture grounding wire to the mounting strap with the green grounding
screw, and then connect it to the house grounding wire with a wire nut.
Carefully tuck the wires back into the outlet box.
6. Attach the canopy to the outlet and tighten it with two ball nuts.
7-8. Adjust the angle of the light pole, and then tighten the screws to fix the pole.
1.
Before
installation,
please
check
whether
the
parts
are
complete
and
whether
the
lamps
are
in
good
condition.
2.
Cut
off
the
power
supply
before
installation,
and
then
perform
wiring.
3.
Install
the
lamp
body
first,
and
then
install
the
power
supply.
4.
Installation
and
maintenance
must
be
carried
out
by
professional
and
technical
personnel.
Installation
steps:
Notice:
3. Attach the mounting bracket to the outlet box using two mounting screws.