Manual

EPS-600
4
B-2. Product Description
B-2-1. EPS-600 Power Supply Hardware Overview
Button Description
1 ON/OFF ON/OFF Power Supply
2 CONST Select voltage or current to be constant
3 MODE Select the volts, milliamps, or time to be displayed
4 �� Changes the displayed value of the selected parameter
5 RUN Starts and Stops the output from the Power Supply
The front and rear panel buttons as shown above are used to set up and run the EPS-600 power
supply. The audible alarm design allows a beep sound for each and every button pressed on the
front membrane keypad. A long beep alarm allows user to identify the run is complete or if an
error occurs. It will continue every ten seconds until any button is pressed or the main power is
turned off.
EPS - 600