User Guide

Be Connect 2.0 User Guide
7
Be Premium, Be Connect, Be Partner
9. Main Menu
 Press the three dots at the left top corner in Figure 11, you can get the main menu.
 The product model and Serial Number display at the top of the interface.
 Press More (Figure 12), and you can get more items.
 In the item Service Guideline, you can read our document Service Guideline, which will help
you to make the troubleshooting. You can also find this documents at our website.
 In the item Configuration, you can configure the battery system again.
 In the item Information (Figure 13), you can read some basic information of the battery.
Figure 11: Status interface
Figure 12: Main menu
Figure 13: Information status
10. Status
 Data of the BMU and BMS will refresh every five seconds. (Figure 11)
11. Events
 The default historical events is for the past half months. Both the BMU and BMS event are
available. If you cannot read the events or the events you want is beyond the past half
months, you can contact our local service partner.
 Internal Communication Failure means BMU<>BMS communication issue. Please check the
LED event code and refer to Service Guideline.
 Monitoring Module Warning means an error occurred. Refer to service checklist, while
No Monitoring Module Warning means everything normal. No action required.