User Guide

Be Connect 2.0 User Guide
5
Be Premium, Be Connect, Be Partner
7. Firmware Update
 The firmware update will start automatically if everything goes well.
 It may take one to ten minutes in different situations.
 Please keep the app in foreground when the update is going on.
 If the firmware of BMS (Battery Management System, secondary level control unit of the
battery system) has been updated. The battery system will have an internal update in five
minutes, which could last for around ten minutes. Some functions of the app may not work
during that process.
 If the update stops in between, please check whether the WiFi connection is good and
whether the battery system is on.
 If the firmware at the battery system has a higher version than that in your mobile device,
you cannot proceed. In this situation, if you are sure your firmware is the latest, you can
contact our local service partner. Otherwise, download the latest version firmware first.
8. Configuration
 You can choose to configure the battery or not at this step (Figure 8). It is necessary to do
the configuration if the battery has not been configured before. Please make sure you have
read the Minimum Configuration List or Compatible Inverter List before the configuration.
 If you are an end customer, please click No to skip the configuration, to avoid incorrect
configuration make the system shutdown.
Figure 7: Find the service guideline
Figure 6: Find the menu