User Guide

Be Connect 2.0 User Guide
4
Be Premium, Be Connect, Be Partner
5. Download Firmware
 Make sure the Internet is available at this step. The app will compare the firmware stored in
the mobile device with that at the server. If that at the server has a higher version, the app
will download it automatically or inform you to download (if you are using cellular data).
 If there is no Internet available on site, you can click Skip after reading the notice to continue.
Strongly recommend you to download the latest version firmware if you have the possibility
to access the Internet.
6. Connect to Battery WiFi
 Click button “To WiFi Settings”, and it will go to the WiFi setting page. (This is for Android,
for the iOS version, you need to go to the Setting page manually.)
 The name of the WiFi begins with BYD. The default password is BYDB-Box. If there are more
than one battery WiFi available, please make sure the correct one is chosen. You can find
the WiFi name at the BMU or the BCU.
 If you cannot find the battery WiFi, please check whether the battery system is on. If you
failed to connect to the Battery WiFi, you can click the three dots at the top left side of the
display (Figure 6), and then choose the Service Guideline for the troubleshooting.
Figure 4: No Internet available notice Figure 5: Cellular data using notice