Installation Manual

NÜO PASS Manual
Installation
9
NÜO PASS Installation in other environments
1) Follow the initial steps listed in page 6.
2) Make 4 M3 holes and another hole with the
dimensions detailed in the diagram, taking the
radii or chamfer dimensions into consideration.
3) Connect the cable to the equipment and
fasten it using screws.
58.7
(x4) Inserto S-M3
118.69
56.49
58.7
26.5
32.2
118.7
126
63
66
33
R
1
8
.
5
4
5
°
15.84
R
1
8
.
5
15.84
62.2
4) Place the front panel.
Install the equipment on outdoor
or indoor surfaces that are free
from vibrations.
Units: mm
Machining on minimum thickness plate: 1.2 mm
-- INSTALLATION IN OTHER ENVIRONMENTS: