Installation Manual

NÜO PASS Manual
Installation
7
NÜO PASS
Installation in plasterboard (thickness 10 - 25mm)
1) Follow the initial steps listed in page 6.
2) Make a hole in the plasterboard with the
dimensions detailed in the diagram.
3) Insert the ush mount support and pass the
cable through one of the holes, then secure it in
place in the plasterboard using the tabs.
128
68
4) Connect the cable to the assembly that was
removed beforehand.
5) Tighten the assembly (1) and place the front
panel (2).
128 x 68 mm
1 2
-- INSTALLATION IN PLASTERBOARD (THICKNESS 10 - 25mm)